Fidget Spinner MIDI Controller

Let’s hack a fidget spinner and turn it into a whirling dervish of sound making! Materials Needed ToolsVelcroScissorsHardwareFidget Spinner!Bluetooth enabled computerLightBlue Bean Coin Cell Battery …By: d777k Continue Reading » Instructables: exploring – featured


Lightbox With Controller and Storage

One of the problems in photography is exposure. For a good photography a controlled environment is required, both at the light and at the environment level. To solve the location problem I have acquired a lightbox, which allows you to define several uniform backgrounds to create contrast. But it was…By: TiagoSantos Continue Reading » Instructables:(…)


IoT Mains Controller. Part 9 : IoT, Home Automation

DisclaimerREAD THIS FIRSTThis Instructable details a project which uses mains power (in this instance UK 240VAC RMS), whilst every care has been taken to use safe practice and good design principles there is always a risk of potentially lethal electrical shock when working with these supply voltages…By: SteveQuinn Continue Reading » Instructables: exploring – featured


ROSbot – Autonomous Robot With LiDAR and Husarion CORE2 controller

ROSbot is an open source, mobile robot platform containing:Digital camera Laser scanner 360° RPLiDAR A2 Solid aluminum cover Wi-Fi antenna Orientation sensor (MPU-9250) 2x left & 2x right DC motors with quadrature encoder Husarion CORE2-ROS (with ASUS Tinker Board inside)It’s pretty large project bu…By: radeknh2 Continue Reading » Instructables: exploring – featured


Adafruit’s Circuit Playground As a Robot Controller With Bluetooth

A friend gave me one of Adafruit’s circuit playgrounds (developer addition) to use, and I wanted to see would it make a good robot controller. The circuit playground is packed full of features like sensors, neo-pixels and even an accelerometer.I wanted to add a L9110 motor controller and create a sm…By: otterbot Continue Reading »(…)


DIY PWM Controller

In this instructable, I will show you how to make PWM Controller. I’m using the laminator for the toner transfer method. What things you will need: Copper – clad board (Dual Layer) Ferric Chloride (FeCl3) Acetone (Nail polish remover) Glossy Paper LASER Printer Marker Pen Scissors Plastic container…By: Pratik Makwana Continue Reading » Instructables: exploring(…)